Linc Feed 33/34/35
Linc Feed -33
Ventajas Lincoln
- Alimentación excelente, gracias a sus cuatro rodillos de arrastre.
- Conmutador selección modo 2/4 tiempos.
- Diseño robusto y ergonómico.
- Displays digitales que muestran texto para facilitar el funcionamiento de la máquina.
- Características; pulsador 2/4 tiempos, Burnback, purga de gas, hilo manual, velocidad inicial.
- Diseñado siguiendo la línea de Lincoln “Robusto y Fiable”
- Dos años de garantía en recambios y mano de obra.
La familia de devanadores LINC FEED combinan un fácil manejo y control por parte del operario, con una perfecta alimentación del hilo. Todos los devanadores están equipados con sistema de arrastre de 4 rodillos. Este sistema está equipado con un potente motor además de un sistema de arrastre estabilizado para mantener la velocidad del hilo estable y constante. Alimentación perfecta y conducción del hilo suave y natural de la bobina a la punta de contacto, diseñado para asegurar la ausencia de enredos en el hilo, y una alimentación estable, fluída y de la mejor calidad. Los devanadores LINC FEED pueden utilizarse fijos o portátiles.
LINC FEED 34 - Air/Water cooled
Ventajas Lincoln
• Rugged and ergonomic design.
• Large bright Volt and Amp meters and read-out during welding.
• Well featured; User Friendly controls with digital display in language of choice
• Features include Presetting, Hot/Soft start and Crater
• Designed the Lincoln way; rugged and reliable.
• Three year warranty on parts and labour.
The LF34 wire feeder was designed to withstand extreme environmental conditions. The design focussed on ruggedness, dimensions and ease of use. The result is an incredibly rugged, protective casing with undercarriage, for use under tough industrial conditions.
The feeder accepts D300 (15 KG) and small D200 (5KG) wire spools with both solid or cored wire including Innershield.
All the LF feeders are equipped with a rugged four-roll drive system. The wire guidance from the coil to gun tip is smooth and avoids any tangles, guaranteeing you trouble free feeding.
The LF 34 is an advanced model. It has a unique digital display showing the pre-settable and actual welding parameters. The LF34 has the ultimate user-friendly controls. All machine settings like 2/4 Stroke, Burn Back, Hot / Soft Start and Crater Fill can be viewed by using one single Select push button. The display will show the function and setting in the language of your choice. The LF34 works with Lincoln analogue power sources such as CV420, CV505, V350PRO and others with Presetting, Hot/Soft start and Crater Features: the LF35 has synergic capability and memory for pre-set job selection
LINC FEED 35 - Air/Water cooled
Ventajas Lincoln
• Rugged and ergonomic design.
• Large bright Volt and Amp meters and read-out during welding.
• Well featured; Synergic capabilities and memory for pre-set job selection.
• Optional remote controlled job selection
• Designed the Lincoln way; rugged and reliable.
• Three year warranty on parts and labour.
The LF35 wire feeder was designed to withstand extreme environmental conditions. The design focussed on ruggedness, dimensions and ease of use. The result is an incredibly rugged, protective casing with undercarriage, for use under tough industrial conditions.
The feeder accepts D300 (15 KG) and small D200 (5KG) wire spools with both solid or cored wire including Innershield.
All the LF feeders are equipped with a rugged four-roll drive system. The wire guidance from the coil to gun tip is smooth and avoids any tangles, guaranteeing you trouble free feeding.
The LF35 is the most advanced model equipped with 2/4-step, run-in, wire inch and gas purge. It has a unique digital display showing the pre-settable and actual welding parameters. The LF35 has the ultimate user-friendly controls. All machine settings like 2/4 Stroke, Burn Back, Hot / Soft Start and Crater Fill can be viewed by using one single Select push button. The display will show the function and setting in the language of your choice. The LF35 also has of a set of Synergic programs and memory. The Memory will store up to 10 pre-set procedures. These programs can be locked and easily recalled from the feeder or remote control. Switching from one program to another Is possible even with the remote control. The LF35 was designed to work with Lincoln analogue power sources such as CV420, CV505, V350PRO and others with Presetting, Hot/Soft start and Crater ?Features: the LF35 has synergic capability and memory for pre-set job selection
